Skip to content

Why Your QR Code Isn't Scanning (And How to Fix It)

You've designed it. You've printed it. You hold up your phone. Nothing. Or you get a scan, but it opens something wrong. Either way, something's broken. Here are the most common causes — and the fix for each.

1. The contrast is too low

This is the most common cause by a wide margin. QR code scanners need clear contrast between the dark modules and the background. A dark brown code on a dark navy background? Probably going to fail. A pale grey code on white? Same problem.

The fix: always use a dark foreground on a light background, or a light foreground on a very dark background. When in doubt, stick to black on white. If you're using brand colours, test them on your actual device before committing to a print run.

Inversion — a white pattern on a dark background — can work, but it's more hit-and-miss across different scanner apps. If you're doing this, test extensively.

2. It's too small

A QR code needs to be large enough for the scanner to resolve the individual modules. At very small sizes, the camera simply can't make out enough detail.

The fix: minimum 2cm × 2cm for scanning at arm's length. For signage viewed from a distance, scale up proportionally. The rule: the minimum dimension should be 1/10th of the expected scanning distance. Scanning from 1 metre away — the code should be at least 10cm.

3. The logo is too large

A logo in the centre of a QR code works by leveraging error correction — the code contains enough redundant data to still be readable even if part of it's obscured. But error correction has limits. If your logo covers more than about 30% of the code area, you've crossed them.

The fix: keep your logo within the central 30% of the code area. Use the highest error correction setting (level H) when adding a logo. And always test the finished code — don't assume.

4. There's not enough quiet zone

QR codes require a clear margin — called a 'quiet zone' — around the pattern. Without it, the scanner can't determine where the code starts and the surrounding design ends.

The fix: keep at least 4 modules of white space (blank space) around all four edges of the code. When embedding a QR code in a design, don't let other design elements bleed right up to the edge of the pattern.

5. The file was saved at too low a resolution and scaled up

PNG files have a fixed pixel resolution. If you save a QR code at 200px × 200px and then scale it up to A3 for a poster, it will be blurry and unscannable.

The fix: always use SVG or EPS format for print. These are vector formats — they scale to any size without any quality loss. QRCodeMonk exports SVG as standard on all plans.

6. The destination URL has broken

The code scans fine. But it opens a 404 page, or the wrong page, or nothing at all. This isn't a design problem — it's a destination problem.

The fix: test your QR code by actually scanning it after creation. Check that the destination is live and correct. If you're using a dynamic QR code, you can fix the destination without reprinting. If it's static, you'll need a new code.

The checklist before anything goes to print

  • Scan it on both iOS and Android
  • Scan it in normal indoor light and dimmer conditions
  • Check the contrast — dark on light or light on dark, never similar shades
  • Measure the physical size — at least 2cm × 2cm for close-range scanning
  • Use SVG or PDF format, never a low-res PNG
  • Visit the destination — make sure it's live and correct
  • Check the quiet zone — clear margin on all sides

Most QR code failures are preventable. Test before you print. Always.

Generate a tested, print-ready QR code →