How to Add Your Logo to a QR Code (Without Breaking It)
QR codes with logos in the centre have become the standard for branded materials. Done properly, they're fully scannable and look significantly better than a plain black square. Done badly, they're an attractive QR code that your customers' phones can't read.
Here's what you need to know.
Why a logo in a QR code can work at all
QR codes have built-in error correction. The pattern contains redundant data — intentionally duplicated information that allows the code to be read even if part of it's damaged or obscured. That error correction is what makes the logo trick possible: the logo covers part of the code, the error correction reconstructs the missing data.
There are four error correction levels: L (7%), M (15%), Q (25%), H (30%). The percentage refers to how much of the code can be obscured while still scanning. For a logo, you want level H — allowing up to 30% of the pattern to be covered.
The 30% rule — and what it actually means
Your logo should cover no more than 30% of the total code area. That sounds generous until you start measuring. A QR code that's 3cm × 3cm has an area of 9cm². 30% of that is 2.7cm². A circle with that area has a diameter of about 1.85cm. That's not a lot of space.
In practice, logos that work best in QR codes are simple, compact marks — a square logo or a circular icon rather than a wide horizontal wordmark. If your logo is wide and text-heavy, it's going to be either unreadably small or too large to be safe.
High error correction means a denser code
Here's the trade-off: higher error correction = more data redundancy = more modules (dots) in the grid = a denser, more complex looking pattern.
For small print sizes (under 2cm), a denser code can become unreliable. If you're adding a logo to a code that's going to be printed small, test it carefully.
Background colour and contrast
Your logo should be on a background that matches the QR code's background — typically white. A logo with transparency or a coloured background that's similar to the dark modules will confuse scanners.
If your logo is dark, put it on a white circle or square of background colour that sits in the centre. Give it enough padding that there's clear separation between the logo and the QR modules.
Test it. Actually test it.
Never assume. Every time you add a logo to a QR code:
- Test on iOS (native camera, not an app)
- Test on Android (Google Lens and/or native camera)
- Test in normal light and lower light conditions
- Test at the actual physical print size — not on screen
- Test after printing, not just from the digital file
Printing can reduce contrast slightly, and small printing inconsistencies can push a borderline code over the edge into non-scanning. Always test the printed version.
What makes a logo work well in a QR code
- Simple, compact shape — icons work better than wordmarks
- High contrast against the QR code background
- A clean background behind the logo (white or light colour)
- Sized to cover no more than 25–28% of the code area (safer than the 30% maximum)
- QR code generated at error correction level H
What makes a logo fail in a QR code
- Too large (over 30% of the code area)
- Low contrast — a light logo on a light code
- Complex, detailed artwork that loses definition at small sizes
- No clear background behind the logo — modules bleed into the logo
- Generated at low error correction level (L or M) with a large logo
QRCodeMonk handles the error correction level automatically when you add a logo, and flags if your design is likely to cause scanning issues before you download.